WEAR BEHAVIOR OF DENTAL COMPOSITES

  • Sovitkar Abhinandan C Government College of Engineering Aurangabad
  • Dr. U. V. Hambire Government Engineering college Aurangabad,
DOI: https://doi.org/10.53555/mce.v2i6.1207
Keywords: Dental Filler Material, Wear rate, Taguchi, ANOVA.

Abstract

In this current study, three types of dental composites namely Tetric N-Ceram Ivoclar Vivadent,Coltene Brilliant NG and Voco Polofil NHT were comparatively evaluated on Pin on disc machine for wear rate analysis. The variables considered for the research work were Speed, load and sliding distance. Various combinations of these variables were made. Pre-experimentation was also carried to find out the most influencing values of these variables. The variables were so chosen that they would represent actual conditions under which the dental composites were supposed to work.The effect of three parameters such as Speed, load and sliding distance on Wear loss of three types of dental filler materials were examined.

In this investigation, an effective approach based on Taguchi method, analysis of variance (ANOVA), multivariable linear regression (MVLR), has been developed to determine the optimum conditions leading to minimum Wear. Experiments were conducted by varying Speed, load and sliding distance using L9 orthogonal array of Taguchi method. After experimentation it was found that Tetric N-Ceram Ivoclar Vivadent has more sliding wear resistance as compare to Coltene Brilliant NG and Voco Polofil NHT dental composite.

Downloads

Download data is not yet available.

Author Biographies

Sovitkar Abhinandan C, Government College of Engineering Aurangabad

PG Student ME Production, Mechanical Engineering Department

Dr. U. V. Hambire, Government Engineering college Aurangabad,

Assistant Professor, Department of Mechanical Engineering

Published
2016-04-30
How to Cite
C, S. A., & Hambire, D. U. V. (2016). WEAR BEHAVIOR OF DENTAL COMPOSITES. IJRDO - Journal of Mechanical And Civil Engineering, 2(6), 45-55. https://doi.org/10.53555/mce.v2i6.1207
Issue
Vol. 2 No. 6 (2016): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.